This type of mounting suspends the signal head from an overhead wire. It is typically used for flashing beacons in the middle of intersections, or for temporary traffic signal installations.

The hanger can be configured to support one, two, three, or four separate signals or beacons. All configurations include a part that clamps onto the supporting span wire (maximum ¾" diameter), plus a wire entrance for the electrical wiring. For any multiple signal hanger, there will also be a hub with a removable bottom plate for wiring access, and there will be a cross arm plate which connects and braces the bottom of the beacons.

All components are aluminum, with stainless steel set screws on the hub.