9600 Series Modem |
||||||||||
| The Naztec 9600 Series Stand Alone The 9600A modem is designed to operate as an FSK modem over existing interconnect cable that is not twisted or shielded. This unique feature includes the capability of rejecting the 60 Hz voltage that might be induced when operating on an active interconnect line. This provides the system administrator with a simple and effective method of transition from an existing system to a Naztec “Closed Loop System” by allowing the operation of the Naztec Model 9600A modem in conjunction with the existing interconnect signals on the other pairs. The system administrator will then have the capability of integrating the new system in a gradual incremental manner instead of a complete and total change over to the new system. The Naztec 9600A and 9600B both will operate on industry standard twisted pair cables in both full and half duplex modes. The 9600B model is designed strictly for twisted pair operation.
|
||||||||||
| Features
|
Specifications
| Data Rate | 300 to 4800 baud |
| Frequencies | Mark - 10,000 KHz Space - 15,000 KHz |
| Transmit Level | 10 dbm or less |
| Data Interface | EIA Rs232 |
| Temperature | -40° C to +85° C |
| Power | 120V AC +/- 15%, typical 50 ma or less |
| LED Indicator | TX, RX, RTS, CTS, CD |
| Timing | CTS 10 +/- 2ms CD 8 +/- 2ms |
| Soft Carrier | 10 +/- 2ms |
| Ordering information Please contact Sales at Fortran Traffic Systems Limited for ordering information. |