 Controllers Area Home |
Other Product Specs
|
Naztec Series
500 NEMA Conflict Monitor
|
|
The Naztec Model NM512E NEMA Conflict Monitor is a cost
effective, reliable enhanced monitor designed for the most demanding traffic applications.
It meets and exceeds NEMA TS1 specifications. The NM512E monitors all critical
intersection functions and uses LEDs to indicate power failures, conflicts, red failures,
controller voltage monitor, program card ajar, and internal processor status. The NM512E
also monitors for short yellows, and programmed sequence failures. It allows selectable
latching of failures. The NM512E monitor utilizes a standard NEMA program card. |
|
|
Features
 |
12 Channel NEMA Monitor |
|
Enhanced features selectable by
channel |
|
Utilizes standard TS1 program card |
|
EPROM Memory / No batteries |
|
Large dedicated RESET button |
|
Exceeds NEMA TS1-1989 functional
and environmental specifications |
|
Microprocessor-based circuitry for
accuracy and reliability |
|
Programming
|
Minimum flash, 0-12 seconds |
|
Short yellow per channel |
|
Programmable sequence monitor |
|
Latch selectable options |
|
Indications
|
Power LED |
|
Conflict LED |
|
Red Fail LED |
|
Indication Fail LED |
|
|
MIN/SEQ Fail LED |
|
+24V I LED |
|
+24V II |
|
CVM (Conflict Volt Monitor) |
|
Environmental
|
Temperature: -30º F to 165º F |
|
Humidity: 0 to 95% |
|
NEMA+
Features
|
Meets and exceeds TS1-1989
Specifications |
|
Utilizes standard TS1 program card |
|
EPROM Memory/No batteries |
|
Machine tooled socket I.C.'s |
|
Latch 24 V failures |
|
Latch CVM failure |
|
Programmable Short Yellow |
|
Enhanced Monitoring |
|
Electrical
|
Power Line Voltage: 75 to 160 VAC,
RMS |
|
Line Frequency: 57 to 63 Hz, 60Hz
nominal |
|
Power Consumption: 9 watts,
typical |
|
Fuse, Front Panel, 1 Amp |
|
Monitoring
Voltage
|
Pickup: 100+/- 2.5 Volts AC, RMS |
|
Dropout: 92.5+/- 2.5 Volts AC, RMS |
|
Hysteresis: 7.5+/- 1.0 Volts AC,
RMS |
|
Dimensions
|
Height: 10.5 inches |
|
Width: 4.5 inches |
|
Depth: 10.9 inches |
|